Adjusting Handle; Removing And Attaching Infant Restraint - Graco SnugRide Click Connect 35 LX Manual Del Usuario

5.1 Adjusting Handle

1. Press handle adjustment buttons on both sides of handle
2. Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
Position A,B,C,D: may be used in vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
3. Push and pull on the handle
to be sure it is locked firmly in
position.

5.2 Removing and Attaching Infant Restraint

To remove, squeeze release handle at back of
infant restraint and lift out of base as shown
To put infant restraint in base, push infant restraint
down until it clicks into base. Pull up on infant
restraint to be sure it is latched firmly into base.
when carrying by handle,
.
Carrying
.
23
.
A
B
Sitting
C
D