Electric Motor And Wheels; Storage And Winter Break; Lifting Or Carrying The Garden; Transporting The Garden Shredder - Viking GE 135 L Manual De Instrucciones

11.4 Electric motor and wheels

The electric motor is maintenance-free.
The wheel bearings are maintenance-free.

11.5 Storage and winter break

Store the machine in a dry and locked
place that is generally free of dust. Make
sure that it is kept out of the reach of
children.
Always store the machine in good
operational condition.
Keep all nuts, pins and bolts tightly
fastened, replace danger signs and
warnings on the machine that have
become illegible, check the entire machine
for wear and damage. Replace all worn or
damaged parts.
Any machine faults must be completely
remedied prior to storage.
Note the following points when storing the
machine for long periods (winter break):
● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
12. Transport
Risk of injury!
Before transporting, carefully read
and observe the section "For your
safety", in particular the
"Transporting the machine" section.
( 4.4)
0478 201 9811 B - EN
12.1 Pulling or pushing the
garden shredder
● Hold the garden shredder at the
handle (1) and tilt to the rear.
● The garden shredder can be pulled or
pushed slowly (walking pace).
12.2 Lifting or carrying the
garden shredder
At least two persons are always
required to lift and carry the
machine.
Wear suitable protective clothing;
the lower arms and upper part of
the body must be fully covered.
– Insert the shredder box and lock in
place. ( 10.5)
● First person: Hold the garden shredder
by handle (1).
● Second person: Hold the garden
shredder at the left and right of wheel
carrier (2) in front of the two feet.
● Lift the garden shredder
simultaneously.
GE 140 L:
The garden shredder can also be
carried in the folded-in condition.
● First person: Hold the garden shredder
at handle (3) of the shredder box.
● Second person: Hold the garden
shredder at the left and right of the
tubular stand in front of the two feet (4).
● Lift the garden shredder
simultaneously.
12.3 Transporting the garden
shredder on a load floor
17
● Secure the machine against
slipping using suitable fastening
materials. Attach ropes or straps to the
wheel carrier (1) or the feed chute (2).

13. Environmental protection

18
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
14. Manufacturer's
declaration of CE conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declare under our sole responsibility that
the machine
Shredding machine for plant trimmings
with electric motor (GE)
manufacturer's
brand:
type:
19
VIKING
GE 135.0 L
GE 140.0 L
19