Publicidad
1
PREPARE YOUR EXO SYSTEM.
NOTE: If you are installing EXO SnowBank on the EXO TopShelf skip to step 2.
A. To extend the arms, first extend the driver-side arm by pulling the pin and
swinging it outward until the arm locks into place.
B. Then pull the pin for the passenger-side arm and extend it until it locks into place.
2
LOOSEN THE KNOBS.
First, push the pin next to the
knobs to the unlocked position.
Completely loosen the knobs by
turning them counter-clockwise
until they no longer turn.
A. Tilt the rear of the ski mounts slightly as you slide them
along the tracks of the arms until they can slide no further.
B. Lower the front of the ski mounts into the track.
C. Tighten both knobs completely and lock them with the key.
D. Then push the pin next to the knobs to locked position.
E. Verify installation by lifting up on each ski mount.
NOTE: If you wish to
install the extra locks
that came with your
EXO SwingBase™ or EXO
TopShelf™ do so now.
Instruction #1036035A - page 2 of 6
A
3
Unlocked
Déverrouillé • Desbloqueado
2X
2X
A
ATTACH THE SKI MOUNTS TO THE ARMS.
B
CAUTION: Keep
your fingers
away from ALL
moving parts!
B
A
B
Locked
Verrouillé • Bloqueado
C
D
C
2X
2X
Publicidad
