Publicidad
1
LOAD YOUR GEAR.
Press the buttons and open the
mounts. Load your skis or boards with
their bindings between the mounts.
Close the mounts with firm pressure.
NOTE: In some cases you may need to
close the mount between your bindings.
1. Ensure your skis or boards are not extending past your side view mirrors when installed.
2. Use caution when swinging open your EXO system with skis and boards installed, as
1
REMOVE THE SKI MOUNT.
Unlock and open the mounts by pressing the buttons.
Remove your skis or boards. Close the mounts. Set the lock
pins to the unlocked position. Then loosen the knobs on the
arms completely and lift the mounts off of the arms.
Instruction #1036035A - page 3 of 6
LOADING
they could make contact with the passenger side of your vehicle.
REMOVAL
2
VERIFY THAT THE MOUNTS ARE CLOSED.
Verify closure by pulling upward on the
skis or boards to see if the mounts open.
If they open, apply more pressure when
closing the mounts. If you've installed lock
cores, use the keys to lock your mounts.
Unlocked
Déverrouillé • Desbloqueado
2X
2X
IMPORTANT!
Be sure to read all the warnings
and warranty information
contained in the insert
accompanying these instructions!
Publicidad
