LG VX9700 Guia Del Usuario página 92

SETTINGS & TOOLS
5. Press Add New Device .
Set the desired device to pairing.
6. If Bluetooth ® power is set to off,
you will be prompted to turn
power on. Select Yes and press
then press
7. The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press
8. The handset will prompt you for
the passkey in BT. Consult the
Bluetooth ® accessory
instructions for the appropriate
passkey in BT (typically "0000"
- 4 zeroes). Enter the passkey in
BT and press
9. Once pairing is successful, select
either Always Ask or Always
Connect (except for audio
devices) and press
10. Once connected, you will see
the device listed in the
Bluetooth Menu and the
®
Bluetooth ® device connected
icon will show up on
your enunciator when
connected to the Bluetooth
device.
90
again.
.
.
.
®
Icon Reference in Adding New
Device
When the Bluetooth
connection is started and paired
devices are found, the following
icons will display to demonstrate the
type of device found (see below).
Icon References When a
●
®
Bluetooth Wireless
Connection is Found (neither
connected nor paired).
When an audio device is
found by your enV
device
When a PC is found by your
enV ® 3 device
When a PDA is found by
your enV
When another phone device
is found by your enV
device
When a printer is found by
your enV
When other undefined
devices are found by your
enV ® 3 device
When a keyboard is found
by your enV
When Car kit or Handsfree
device is searched by your
enV ® 3 device
wireless
®
® 3
® 3 device
® 3
® 3 device
® 3 device