Noise Level - CAMPAGNOLA F4 Manual De Utilización Y Mantenimiento

NO
A
• Never remove, alter or damage any parts or safety devices of the units.
• Set the supply pressure to 10 bar.
• When the tool is connected to the air line but is not being used, make sure the safety
catch (11) is engaged.
• Always check the efficiency of the safety catch (11) of the lever (12).
• All the maintenance operations which are not described in the manual must be carried
out by an authorized service shop.
• Before performing any maintenance, put the safety catch (11) on and disconnect the air hose.
Precautions
WARNING: The manufacturer declines all responsibilities if the precautions
below are not taken.
Results of the tests made by law
WARNING: Risks due to the operator's contact with the noise and vibrations
of the machine or tool.

1) NOISE LEVEL

Continuous sound pressure level A in the working place, measured according to
the UNI EN ISO 3744 regulations:
The levels measured at the various auxiliary equipment are high as they exceed
the set reference limit LpA
filled:
• The operator shall undergo a periodic check up.
• The operator must be informed of the risks faced caused by exposure to high
noise levels.
• Safe and adequate sound barriers or other hearing protection must be used.
OK
B
270193
LpA = 87 dBA
eq
= 70 dBA. The following obligations have to be ful-
eq
270194
9 - 40