Select Base; Default Setting; Base Settings - GE Thompson 28300 Guia Del Usuario

Select Base

This option allows you to register a handset to more than one base and select which
base it takes the signal from. The handset can also search for the most suitable base
automatically if Auto Base is selected.
From the HANDSET SETTINGS menu;
1. Use the 6 or 5 button to scroll to SELECT BASE.
. Press the OK (SKL) button to enter the menu.
3. Use the 6 or 5 button to scroll to a specific base (1-4, Auto Base).
4. Press the OK (SKL) button to save your selection.

Default Setting

This option allows you to return the handset to factory preset settings.
From the HANDSET SETTINGS menu;
1. Use the 6 or 5 button to scroll to DEFAULT.
. Press the OK (SKL) button to enter the menu.
3. Press the OK (SKL) button to confirm the selection.
NOTE: If you select OK, all the settings in the programmable menu
are returned to factory default setting. You will hear a confirmation
tone.

Base Settings

There are four programmable menus available: Ringer Type, Ringer On/Off, Skype
Status and Default Setting.
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU (SKL) button and use the 6 or 5 button to scroll to BASE
SETTINGS.
3. Press the OK (SKL) button to enter the menu.
5