Checking The Package Contents; Before You Start - Olympia A 4610 Manual Del Usaurio

Checking the Package Contents

Checking the Package Contents
Check the package contents of the laminator before putting the laminator
into operation. If anything is missing or damaged, do not put the lamina-
tor into operation. Please contact our Service Department.
• A 4610 laminator
• Power cable
• Operating manual

Before You Start

Please observe the following information to ensure continued reliable
operation of the laminator.
• Pay attention to the symbols on the front of the machine (6-roller
technology, maximum lamination size, Reverse button, cold lamination,
heat-up time, laminating speed and foil thickness) - further information
is provided in the various chapters in this operating manual.
• Do not laminate metal, wet or uneven materials.
• Always feed the laminating pouches into the laminator
the closed side first and aligned straight.
• If laminating pouches need to be cut, only cut the laminating pouches
after laminating.
• Please remember that hot laminated materials are permanently bond-
ed to the laminating pouch and cannot be separated from the foil
again without possible damage.
• Do not pull the laminating pouch out of the
ing.
• If you need to transport the laminator, carry it using the recessed
grip
.
7
16
output
G
with
infeed
10
during laminat-
2