Getting Started; Testing Checklist - Trividia Health TRUE FOCUS Manual Del Usaurio

GETTING STARTED

The meter comes with pre-set time and date. Before using the meter for the first time or after a battery
change, check time and date and update as needed.
The meter turns on when:
~ a test strip is inserted into the Test Port, or
~ when "S" Button is pressed and released (see Memory and Meter Set Up).
Meter turns off when:
~ the test strip is released from the meter,
~ the "S" Button is pressed and held for 3 seconds, or
~ after 2 minutes of non-use.
14

Testing Checklist:

✔ Check meter for damage (cracked Display, missing button, etc.). If damage is seen, do not use meter. Call
for assistance.
✔ Check test strip vial for damage (cracked or broken vial). Discard damaged vial and contents (test strips).
Use a new vial of test strips for testing.
✔ Write date first opened on test strip vial. Check Use By Dates (EXP) (printed and written) before using
any test strips from the vial. Do not use 90 days after opening or if printed Use By Date (EXP) has passed,
whichever comes first.
✔ For Control Test, make sure you have clean tissues available. A small piece of plastic wrap, aluminum foil or
waxed paper may be used for control solution sample drop in the Control Test.
✔ Check control solution bottle for any leaks or broken cap. Discard damaged bottle and open a new one for
testing.
✔ Write date first opened on control solution bottle label. Check Use By Dates (EXP) (printed and written)
before using control solution. Do not use 90 days after opening or if printed Use By Date (EXP) has passed,
whichever comes first.
15