Trividia Health TRUE FOCUS Manual Del Usaurio página 13

8. With test strip 9. Remove test
still in meter, strip from drop
touch Sample when Display
Tip to top of begins to count
drop. Allow down from 4.
drop to be Meter is testing.
drawn into test
strip.
Control Solution
Bottle Label
Control Solution/Solución de Control
Level/Nivel 2
Manufactured for/Fabricado para:
Test Strip Vial Label
Fort Lauderdale FL 33309 USA
For in vitro diagnostic use only.
Store in a dry place at room temperature between
59-86F (15-30C). DO NOT REFRIGERATE
OR FREEZE.
U5TVH02 Rev. 40 - U5TVH72
(Examples only and do not represent
actual Control Test ranges)
10. After testing is 11. Compare result to Control
finished, result Test Range printed on
appears in the the test strip vial label for
meter Display the control solution you
with the Control are testing. If result is in
Symbol. range, the blood glucose
monitoring system can be
used for testing blood.
If result is not within range,
perform Control Test again.
20
3 ml
12. After result is shown,
hold meter with test
strip pointing into an
appropriate waste
container. Press Strip
Release Button to release
and discard the test strip.
Meter turns off. Recap
control solution bottle
tightly.
Caution!
• If Control Test result is still outside range after a second Control Test, do
not use the blood glucose monitoring system for testing blood. Call for
assistance (see cover for phone number).
~ If test strip has been out of the vial too long before testing, an error
message appears upon insertion of the test strip into the meter.
Discard old test strip and retest using a new test strip.
~ If test strip is removed before testing is finished, an error message
appears. Discard old test strip and retest using a new test strip.
~ Do not put control solution drop on top of test strip.
~ If meter does not begin testing soon after drawing up sample,
discard test strip. Repeat with a new test strip. If problem persists,
see Troubleshooting.
~ Removing the test strip before result is displayed cancels the test.
An error message appears and the result is not stored in Memory.
Retest with a new test strip and do not remove before result is
displayed.
21