ENGLISH
PULL BOOST
INPUT
VOLUME
1
1. INPUT
Connect to your guitar using a ¼"
instrument cable.
2. VOLUME
Control the output volume and gain of your
amplifier. Pull this knob to engage the gain
boost feature. This control can be operated
using a 2-way foot switch (PEDL-90016).
Note: when a foot switch is connected to
the amplifier it will override the front panel
control meaning the gain boost can only be
turned on and off using the foot switch.
3.0
FRONT PANEL FUNCTIONS
TILT
BASS
4
2
3
EQ Settings: your Origin amplifier has
3 equalisation controls (bass, middle and
treble) plus an amplifier channel voice
control (tilt). All these controls allow you
to adjust the frequency response of your
amplifier and the voicing to adjust how
it sounds. When adjusting to your sound
familiarise yourself with how each of
these controls affects your overall tone to
get the most from your amplifier.
3. TILT
Your Origin amplifier has a tilt control to
add more flexibility to your EQ.
EQUALISATION
MIDDLE
TREBLE
5
6
Tilt: the tilt control adjusts your EQ to add
more flexibility to your amplifier's sound.
This control is independent of the main
EQ providing a highly effective filter that
can change the voice of your amplifier
from a traditional normal Marshall tone
to a vintage high treble voice. Dialled all
the way to the left the sound is warm and
full providing a thick overall tone. When
dialled all the way to the right the overall
tone is brighter for players looking for
more cut through and bite.
LOW
OFF
HIGH
ON
OUTPUT
POWER
7
8
9