Marshall ORIGIN 5 COMBO Manual Del Usuario página 7

ENGLISH
5
1. MAINS INLET
Connect your amplifier to the supplied
mains lead using this socket.
2. 16 OHM OUTPUT
Your Celestion Eight-15 speaker is
connected here.
Note: always ensure before connecting
and disconnecting speaker loads from
your Origin that it is switched off first.
4.0
REAR PANEL FUNCTIONS
4 3
3. EFFECTS LOOP RETURN
Return your signal from your effects or
outboard processor here.
4. EFFECTS LOOP SEND
Send your signal to your effects or
outboard processor from this socket.
Note: The Origin effects loop has been
designed as a true bypass circuit so your
signal path is not affected when the loop
is not in use. To activate the effects loop
you must plug your effects into the send
and return outputs and insert the supplied
footswitch (PEDL-90016). Using the
footswitch you can then turn the effects
loop on and off.
2
5. FOOT SWITCH
Connect a 2-way foot switch
(PEDL-90016) to this socket to control
the gain boost function and turn the
effects loop on and off.
1