Assembly - Easy Home CRSF-16BI M Manual Del Usuario

Pedestal Fan

ASSEMBLY

 Place the base cover on top of the rubber base and insert the bottom of the extension
pole in the base hole. (see photo below)
 Gently lay the base and extension pole on its' side and screw the black wing nut (found
in plastic bag) onto the bottom of the base securely.
 Set the base upright and loosen the white cap on the top of the extension pole and pull
the chrome inner pole up. Tighten the white cap to secure the chrome inner pole in
place.
 Pick up the motor housing and look at the bottom. There is a screw that may need to
be loosened but should not be removed. (see photo)
 Slip the motor housing onto the chrome pole extension and tighten screw on the motor
housing to secure it in place.
 Unscrew and remove the white plastic nut. Place the back grill onto the shaft making
sure it lines up with the pins. (The handle on the back of the grill should be on top)
Replace and tighten the white plastic nut.
 Remove and discard the black plastic sheath on the shaft. Place the blades on the shaft
making sure the blades fit securely with the pins. Place the white fan knob (found in
plastic bag) onto shaft.
turned counter clockwise (or to the left) to tighten securely.

4
888-367-7373
____________________________ ____________ASSEMBLY
The white fan knob is reverse threaded and must be
AFTER SALES SUPPORT
customer-service@wk-usa.com