Assembly - Easy Home WF-008R Manual Del Usuario

Assembly

1. Unpack the twin window fan from the box. NOTE: Be sure to check packaging
materials for all parts (such as screws and feet) that are required to assemble
your fan.
2. Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
3. Using a damp cloth or sponge, wipe down the twin window fan and dry
thoroughly. DO NOT IMMERSE THE TWIN WINDOW FAN IN WATER OR ANY
OTHER LIQUID.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE
DO NOT IMMERSE THE TWIN WINDOW FAN INTO WATER AT ANY TIME
4. If using this fan on a hard floor or table, lay the fan gently on the floor or
stable surface, take the feet (#6) and carefully snap them into each groove on
the bottom of the fan. Secure the feet by inserting and tightening the screws
(provided) using a Phillips head screwdriver.
NOTE: FEET NEEDED ONLY IF USING ON THE FLOOR OR ON A TABLE. DO NOT
ATTACH FEET IF PLACING THIS UNIT IN A WINDOW.
NOTE: This fan is designed and recommended for use with a screen in the
window.
4
Assembly