Multiblitz XENOLUX 250 Instrucciones De Uso página 9

Thank you for choosing MULTIBLITZ, we hope you enjoy working with this high
quality product.
MULTIBLITZ flash units are without exception designed and manufactured
in Germany.
CAUTION!
Please read the instruction manual carefully
before using this product.
Flash-/ and halogen tubes as well as metal
parts can become very warm during operation
and may cause burns if not handled properly.
Opening the unit could be extremely dange-
rous! Do not open the unit by yourself! Service
should only be executed by an authorized
MULTIBLITZ service location.
Do not obstruct the venting slots.
Do not place filters, diffusing materials, or any
other obstructions directly onto the flash-/ and
halogen tubes.
Do not expose the unit to water, nor spray-/ or
dripping water.
Do not run the unit with unregulated gaso line-/
or diesel generators.
When permanently in use, this unit should be
serviced once a year by an authorized
MULTIBLITZ service location.
The crossed out wheeled bin
label that can be found on your
product indicates that this pro-
duct should not be disposed of
via the normal house hold waste
stream. To prevent possible
harm to the environment or
human health please separate this product
from other waste streams to ensure that it can
be recycled in an environmentally sound man-
ner. For more details on available collection
facilities please contact your local government
office or the retailer where you purchased this
product.
Operating Instructions
XENOLUX
250-500-1000-1500
Caution:
Be sure to form the flash capacitors before first
use of the equipment as well as after every three
month of storage.
To do this, proceed as follows:
1. Switch unit on.
2. Set unit for full power (1/1).
3. Do NOT fire any flashes!!!
4. Leave unit in this condition for one hour.
5. Do NOT turn on the modeling light.
The capacitors are formed after one hour, and
the unit may be used.
Wireless remote control
XENOLUX units are designed for wireless remote
control. All electrical functions can be controlled
in this manner.
It should be noted that the transmitter and re-
ceiver of the remote control are NOT included in
the basic equipment. However, every XENOLUX
has a connector (30) for the corresponding
receiver.
A detailed description of all remote-control func-
tions is supplied with the remote control unit.
1. Basic outfit
XENOLUX 250, 500
Flash unit with plug-in flash tube, halogen
modeling lamp with bayonet base B 15 d,
power cable, sync cable, protective cover.
XENOLUX 1000, 1500
Flash unit with plug-in flash tube, halogen
modeling lamp with GX 6.35 base, Pyrex glo-
be, power cable, sync cable, protective cover,
two spare fuses.
2. Accessories
Various interchangeable reflectors, folding
reflectors, honeycomb filters, diffusing reflec-
tors, barndoors, snoots, Fresnel and spot
attachments, stands. (See system diagram at
the end of these instructions.)
5