Attach The Wall Bracket - Hoover BH52210 Manual De Instrucciones

Attach the wall bracket:

First, fully assemble the vacuum but do not attach the battery.
Attach the wall
bracket to
the handle.
Use both screws
and wall plugs to
secure the wall
4 bracket to the wall.
Place covers over
the screws.
5
With the wall bracket
attached, stand the
vacuum close to the
wall, in the upright
position with the
2
Powered Head
flat on the floor.
Firmly press the
5
vacuum handle
into the wall
bracket to secure.
Holding the wall
bracket firmly in
place, carefully
remove the
vacuum. Using
a pencil
3
make a small
mark for
each screw.
6
The tools can
be stored on the
wall bracket.