Installation Of Appliance; Installation Accessories - Beko BHCB 61632 XH Manual Del Usuario

5

Installation Of Appliance

WARNING!
A
Before starting the installation,
read the safety information on
User Manual.
WARNING!
Failure to install with screws and
A
stabilizers in accordance with these
instructions may result in electric
shock.
For the installation of the hood, please contact
the nearest Authorized Service.
It is the customer's responsibility to prepare
the location and electrical installation of the
hood.
5.1 Position of the Appliance
(Figure 6)
Distance between the cooker and the cooker
•
hood must be considered prior to assembly.
This distance should be 65 cm (Figure 6).
Distance must be measured from the sur-
•
face of grate for gas cookers,
from surface of glass for electric cookers.
•
Cooker Hood / User Manual

5.2 Installation Accessories

15 16 17
1. Product
2. Inner Chimney
3. Outer Chimney
4. Ø150/120 mm Plastic Flue Adapter
5. Chimney Connection Plate
6. User Manual
7. Assembly Pattern
8. 6x Hanging Plates
9. 6x Ø6mm Plastic Dowel
10. 3x Ø10mm Plastic Dowel
11. 3x 5.5x60 Wall Mount Screw
12. 2x M5x35 Hanging Plate Connection
Screw
13. 6x 3.9x22 Chimney Connection Plate
Screw
14. 2x 3,5x9,5 Chimney Connection Plate
Screw
15. 2X 3,5X9,5 Blind Screw
16. Plastic Adapter (Square to Round)
17. Non-Return Valve
18. Air Baffle
19. Plastic Adapter (Air Diverter)
The information required to make the location
suitable for the installation of the hood is giv-
en below.
Davlumbaz
Kullanma kılavuzu
BDT6050I
BDT9050I
TR
www.beko.com
14
18
19
11 / EN