Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
28
Control panel
Display
1
Top Compartment indicator
2
Top Compartment temperature indicator and timer indicator
3
Bottom Compartment temperature indicator
4
Bottom Compartment indicator
5
Alarm indicator
Switching on
To switch on the appliance do these steps:
1.
Connect the mains plug to the power socket.
2.
Press the ON/OFF button if the display is off.
3.
If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to
"What to do if...".
4.
The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
Switching off
To switch off the appliance do these steps:
1.
Press the ON/OFF button for 5 seconds.
2.
The display switches off.
3.
To disconnect the appliance from the power disconnect the mains plug from the pow-
er socket.
Temperature regulation
The set temperature of the wine cellar may be adjusted by pressing the temperature regula-
tors.
The temperature indicators show the set temperature.
The set temperature will be reached within 24 hours.
Refer to "Daily use - Wine Arrangement".
After a power failure the set temperature remains stored.
Light Button
If you want to maintain the light on with the door closed, it is sufficient to open and close
the door and the light will remain ON automatically for 10 minutes.
If you want to switch off the light before the automatic turn off time, open the door and
press the light button.
The light has no negative effect on the quality on the wine.
1
2
min
3
5
4
Publicidad
Capítulos
Tabla de contenido
