GE JCAS745 Manual De Uso página 69

Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
SELF
CLEAN
START
TIME
START
(on some models)
How to Delay the Start of Cleaning.
1. Touch the SELF CLEAN pad.
2. Using the + or – pad, enter the desired clean
time.
3. Touch the START TIME pad.
4. Using the + or – pad, enter the time of day you
want the clean cycle to start.
5. Touch the START pad.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a soap-
filled scrubbing pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, re-
peat the cycle.
The door locks automatically. The display will
show the start time. It will not be possible to open
the oven door until the temperature drops below
the lock temperature and the LOCKED DOOR light
goes off.
When the LOCKED DOOR light is off, open the
door.
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• If the shelves become hard to slide, wipe the
shelf supports with cooking oil.
69