Oven Vent; Stainless Steel Surfaces (On Some Models) - GE JCAS745 Manual De Uso

Care and cleaning of the range.
74

Oven Vent

On glass cooktop models, the oven is vented
through an opening at the rear of the cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear surface
unit.
Painted Surfaces (on some models)
Painted surfaces include the sides of the range
and the sides of the door trim.
To clean the painted surfaces, use a hot, damp
cloth with a mild detergent suitable for these sur-
faces. Use a clean, hot, damp cloth to remove
soap. Dry with a dry, clean cloth.

Stainless Steel Surfaces (on some models)

Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
Glass Window (on some models)
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.
Never cover the opening with aluminum foil or
any other material.
Do not use steel-wood pads, commercial oven
cleaners, cleaning powders or other abrasive
cleaners. They will damage the surface.