Information On The Appliance; Charging - Silvercrest SGRBI 500 A1 Instrucciones De Uso

Information on the appliance

This appliance is intended for massaging and cleansing facial skin . The vibrating
movements by the brushes cleanse the skin, remove dander and prepare the skin
optimally for subsequently applied skin care products . This will enhance your
overall complexion, while improving blood circulation through the skin .
NOTE
► If you wish to use the appliance for removing make-up as well, we recommend
a preliminary cleansing with make-up removal products .

Charging

NOTE
► Charge the appliance for about 15 hours before the first use . This also
applies even if the LED display 2 already indicates a full battery by a
permanent green light .
► The appliance operating time with fully charged battery is approx .
40 minutes .
1) Insert the connector plug w into the socket 8 on the base of the charger 4 .
2) Lead the cable through the cable duct so that the charger 4 can stand level
on the base .
3) Place the charger 4 on a clean and flat surface .
4) Plug the mains adapter e into a power socket .
5) Place the hand unit 3 in the recess on the charger 4 .
The LED display 2 flashes red as soon as the charging starts . Once the appliance
is fully charged, the LED display 2 shows a permanent green light .
NOTE
► As this appliance works with induction charging, there are no contacts on
either the hand unit 3 or charger 4 that need to contact each other for
the appliance to charge .
■ 44 GB │ MT
│
SGRBI 500 A1