Narex EPL 10-5 E Instrucciones De Uso Originales página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Maintenance
The vent holes of the engine cover (26) must not get plugged. Grease
the pull rod (10) and guide bell (3) occasionally with several oil drops.
The cable can only be replaced in an authorised electric workshop which
holds a relevant licence to perform these types of activities.
Storage
Wrapped machine can be stored in a dry storage without heating, where
the temperature does not drop below -5 °C.
Keep unwrapped machine in a dry storage only, where the temperature
does not drop below +5 °C, and where accidental temperature changes
are prevented.
Recycling
Electric tools, accessories and packages should be delivered for re - as-
sessment, not damaging the environment.
For EU countries only:
Do not throw electric tools in domestic refuse!
According to European Directive No. 2002/96/EC on obsolete electric
and electronic furnishings, and its enforcement in national laws, useless
dismantled electric tools must be collected for re-assessment that does
not damage environment.
Warranty
We provide warranty for material or manufacturing defects of our ma-
chines, in accordance with the legal provisions of the respective country,
however 12 months as the minimum. In the European Union countries,
the warranty period is 24 months for exclusively private use (demon-
strated by invoice or delivery note).
Any damages resulting from common wear, overloading, improper han-
dling or - in other words - damages caused by the user, or caused by
use that is contradictory to the directions for use, or damages that were
known at the time of purchase, are excluded from the warranty.
Complaints can only be accepted if the undismantled machine is sent
back to the supplier or to the authorized NAREX service shop. Make sure
you save the Directions for Use, Safety Instructions, List of Spare Parts
and Proof of Purchase in a safe place. Otherwise the current warranty
terms of the manufacturer always apply.
Information on noise level and
vibrations
Measured values were obtained according to EN 60745.
EPL 10-5 E; EPL 10-5 BE
Sound pressure level L
= 86 dB (A).
pA
Sound power level L
= 99 dB (A).
wA
Measuring inaccuracy K = 3 dB (A).
Sound protection is recommended!
The weighed effective vibration acceleration value is 6 m.s
Measuring inaccuracy K = 1.5 m.s
.
-2
.
-2
Declaration of Conformity
We hereby declare that this tool conforms to the requirements of the
below listed standards and directives.
Safety:
EN 60745-1; EN 60745-2-11
Directive 2006/42/EC
Electromagnetic compatibility:
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Directive 2004/108/EC
2010
Narex s.r.o.
Chelčického 1932
Česká Lípa, Postcode 470 01
Changes reserved
English
Antonín Pomeisl
CEO of company
01. 08. 2010
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Epl 10-5 be

Tabla de contenido