Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer KEH-P4025 Manual Del Usuario

Audio Adjustments

Introduction of audio
adjustments
1 display
AUDIO
Shows the audio adjustments status.
2 indicator
LOUD
Appears in the display when loudness is
turned on.
Press to display the audio function
AUDIO
names.
Press repeatedly to switch between the
AUDIO
following audio functions:
(balance adjustment)—
FAD
(loudness)—
LOUD
enhancer)—
SLA
• When selecting the FM tuner as the source,
you cannot switch to
• To return to the display of each source, press
.
BAND
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
13 En
1
(equalizer)—
EQ-L
(front image
FIE
(source level adjustment)
.
SLA

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
Press
AUDIO
2
• If the balance setting has been previously
adjusted,
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
•
FAD F15
front/rear speaker balance moves from front to
rear.
•
FAD 0
speakers are used.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
•
BAL L9
speaker balance moves from left to right.
to select
AUDIO FAD
until appears in the display.
FAD
will be displayed.
BAL
– is displayed as the
FAD R15
is the proper setting when only two
BAL 0
– is displayed as the left/right
BAL R9
.
is displayed.