Adjusting The Crossover Frequency - JVC KW-NSX1 Manual De Instrucciones

Ocultar thumbs Ver también para KW-NSX1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the sound precisely
1
1
Perform steps
preset sound mode," then...
2
Select a band.
3
Adjust the sound.
Reset
Changes level of Low/Mid/
High to 0.
Freq
Selects frequency.
Q
Adjusts the width of the
frequency.*
Bass
Activates/deactivates bass.*
SW Level
Adjusts subwoofer level.
The adjustments are overwritten if <User>
setting has been made (☞ page 38), and <User>
is activated.
• The adjustments are memorized until you
adjust sound again.
• To make adjustment for other bands, repeat
2
3
steps
and
.
1
*
Fixed for "High" band.
2
*
Only for "Low" band.
2
and
of "Selecting a
1
2
Adjusting the crossover
frequency
1
On <AV Menu> screen:
2
3
Select the item to adjust, then make
adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Adjusts the crossover for subwoofer (low pass filter).
Adjusts the crossover frequency.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.
* Not selectable when <Freq> is set to <Through>.
39

Publicidad

Tabla de contenido
loading

Tabla de contenido