Setting Menu Items - JVC KW-NSX1 Manual De Instrucciones

Setting menu items

• When changing settings for <Amplifier Gain>, <AV Input> and <Input> setting in <Navigation Input>,
turn off the AV source. For other settings, change them when the AV source is turned on.
Menu item
Fader/Balance
Equalizer
Loudness
Crossover
Volume Adjust
Amplifier Gain *
Speaker Select
* To change the setting, turn off the AV source by pressing [AV Off] on <AV Menu> screen beforehand.
Selectable setting/item
Fader : Adjust the front and rear speaker output balance.
F6 to R6; Initial 0
♦
• When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
♦ L6 to R6; Initial 0
Press [ 5/∞/2/3 ] or drag [
• To clear the adjustment, press [Center].
Change the sound mode or adjust and store the equalization for each source.
(☞ page 38)
Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User
♦
You can activate/deactivate loudness.
♦ On : Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
♦ Off : Cancels.
Adjust the crossover frequency. (☞ page 39)
Adjust and store the auto-adjustment volume level for each source. (For
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
level will automatically increase or decrease when you change the source.
♦ –15 to +06; Initial 00
On : Activates the built-in amplifier.
♦
Off : Deactivates the built-in amplifier.
♦
Select the size of the connected speaker.
Standard/Narrow/Middle/Wide
♦
45
Initial: Underlined
] to adjust.