Setting Screen; Setting Menu Items; Displaying The Menu Screen - JVC KW-V41BT Manual De Instrucciones

SETTINGS

Setting menu items

❏ Displaying the < Settings> menu screen
On the Home screen:
• When changing settings for <AV Input> and
<Navigation Input> , turn off the AV source
(Page 7). Other settings can be changed when
the AV source is turned on.
44
❏ <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 38)
• Flat (Initial)/Hard Rock/Jazz/Pops/R&B/Talk/
User/Vocal Boost/Bass Boost/Classical/Dance
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
• OFF: Cancels.
<X'over>
Adjust the crossover frequency. (Page 39)
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV .) The
volume level will automatically increase or decrease
when you change the source.
• –15 to +6 (Initial: 0)
<Subwoofer>
• ON (Initial): Activates the subwoofer.
• OFF: Deactivates the subwoofer.
<Bass Boost>
Select your preferred bass boost level.
• OFF (Initial)/Level 1/Level 2
] to adjust.