Making Cookies - Klarstein 10031667 Manual De Usuario

21

Making Cookies

Assembly:
1. Insert the worm shaft into the cutter housing, the plastic end first. Place the sha-
per fixing in the cutter housing. Place the former on the cutter housing and screw
the ring on the cutter housing. (Make sure the notches of the separator fit onto
the projections of the mincer head.)
2. Attach the cutter housing to the motor unit.
3. Place the tray on the upright part of the cutter housing, insert the shaper.
4. Now the appliance is ready for making cookie.
Procedure:
Choice of four cookie styles.