Kübler CODIX 134 Instrucciones De Servicio página 12

Screw terminal 6:
Common GND connection for screw terminal 4
(reset key locking input) and screw terminal 5
(time range switching ).
Screw terminal 7:
(–) external power supply for the backlight option
Screw terminal 8:
(+) external power supply for the backlight option
(24 V DC ±20 %, 50 mA), Fuse T0.08 A, delayed action
All low voltages, SELV, reinforced/double
!
insulation.
Signal inputs must be protected with an exter-
DANGER
nal delayed T0.01 A fuse when the source
does not provide protective impedance
(fuse/current limitation).
Page 6 | ENG
Scope of delivery:
Timer
Clamp
Front frame for screw mounting
Panel cut-out 50 x 25 mm
Front frame for clamp mounting
Panel cut-out 50 x 25 mm
Seal, Operating instructions
Note:
t
This device contains a lithium battery. In
compliance with the battery directive, we
inform you that:
Batteries must not be discarded in the
household waste, but the law obliges you to
bring them to the collection point specifically
provided for that purpose. You can send us
back the complete devices after use. If you
can remove the batteries according to the
state of the art, you can also bring them to a
local collection point or to a retailer collecting
batteries.
Specific provisions for returning lithium
batteries:
Avoid short-circuits! For that purpose, pro-
tect the poles with isolating tape. The poles
of the lithium battery shall not come in con-
tact with metallic objects, neither by accident
nor intentionally!
Batteries containing pollutants are marked
with a symbol representing a crossed-out
garbage can and the chemical symbol of the
heavy metal that determines their classifica-
tion as containing pollutants. Thank you for
your help!