Press the ESPRESSO
delivery. The machine will stop delivery automatically
when the programmed measure is reached.
During supply, the ESPRESSO
turned on with blinking white light, the display
shows the animation of the selected beverage.
If power supply is interrupted during the coffee
supply cycle, restore power supply and restart the
coffee supply procedure.
PREPARING THE COFFEE
(30 ml) button to start
button is
If after supply, the water inside the tank falls
below the minimum level, the machine will
show the following animation.
Fill the water tank up to the MAX level indicated.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
EN
49