Safety Shut-Off - MicroPower SMC-HF 100 Instrucciones De Uso

Maintenance
Must only be carried out by authorised personnel.
Troubleshooting
Must only be carried out by authorised personnel.

Safety shut-off

See LED indicators
Charging will be temporarily interrupted or reduced if:
The temperature exceeds the permitted values.
Note any faults and contact authorised service personnel.
Checks
1. Check that the battery is fault-free, in good condition and is the right type for the
battery charger.
2. Check that the battery is correctly connected and that any battery fuse is not broken.
3. Check that the mains voltage is correct and that none of the fuses are broken.
4. Check the cabling and connection device to ensure there is no visible damage.
Recycling
The charger must be recycled as metal and electronic waste.
12