Simplified Eu Declaration Of Conformity - MELICONI AD PROFESSIONAL Instrucciones De Uso

• LED on, indicates that connection to the power supply is correct. Power supply is on.
• Switch on the device (TV/DECODER) and select the desired channel.
• The power can be supplied directly from the antenna cable on specifi c TV or DECODERS
(see user manual for the TV/DECODER device).
C
Proceed as follows when if the image quality is unsatisfactory or no signal is received:
• Rotate and/or tilt the antenna until you achieve quality reception.
• Regulate the gain by adjusting the amplifi cation; highest gain level does not always
correspond to a better image quality.
• If possible, we recommend to tune the TV channels (TV/DECODER) by connecting it
temporarily to a different and valid signal source (apartment block antenna).
It is worth remembering that the use of an internal antenna should be considered an "alternative"
solution for the reception of television channels; so, as a result of the intensity of the signals
that the antenna can achieve inside the room, more or less satisfactory results can be achieved
depending on the conditions of use.
D
• Indoor amplifi ed antenna
• 230V ac - 50 Hz power supply from the mains via the adapter included in the box.
• Reception of digital terrestrial TV signals (DVB-T) and DAB and DAB+ digital radio signals.
• Reception range: VHF (band III - 174~230 MHz) and UHF (470~790 MHz).
• 4G LTE + GSM interference proof fi lters.
• Fine tuning signal adjustment: up to 47 dB.
• Consumption: <2 W
• Output impedance: 75 Ohm
E
- Antenna
- Antenna support
- AC/DC power supply
- IEC-male coaxial cable to 1.1 m IEC-male
- Instruction booklet
2 YEAR WARRANTY - The warranty will no longer be valid if the product is tampered with or
used incorrectly. Keep your receipt as proof of warranty.
The manufacturer, Meliconi SpA, declares that the type of radio equipment "Ad Professional
The full text of the EU Declaration of Conformity can be found at the following link: www.
The crossed bin symbol on the appliance indicates that, at the end of its life cycle, the product must be disposed of
separately from other waste. So, at the end of its life cycle, the user must take the equipment to a suitable separate
waste disposal centre for electronic and electrical waste or return it to the retailer when purchasing a new appliance of the
same type, on a one for one basis. Proper separate disposal for the future use of the equipment designated for recycling,
treatment and environmentally compatible disposal helps prevent possible negative effects on the environment and on
human health and encourages recycling and/or reuse of the materials used to produce the equipment.
4
Reception improvement
Technical features and specifi cations
Box contents

SIMPLIFIED EU DECLARATION OF CONFORMITY

amplifi ed antenna" complies with Directive 2014/53/EU (RED).
meliconi.com/doc/adprof