Ce Gas Categories; Gas Pressure And Ratings; Ce & General International Countries; Setting Pressure For "Min" Tap Position - Garland GF SENTRY Serie Instrucciones De Instalación Y Operación

DIMENSIONS AND SPECIFICATIONS continued

CE Gas Categories

Country
Category
GB, IE, ES, PT, GR
GB, IE, ES, PT, BE, FR
FR, NL, DE, ES

Gas Pressure And Ratings

CE & General International Countries
Pressure Setting / Injector Size
2nd Family, Group H
G20 @ 20 mbar inlet
MODELS Setting
Pressure*
mbar
GFIR 20
* No appliance pressure regulator used, pressure measured at the test nipple on main manifold with all burners lit.
Heat Input (Gross)
2nd Family, Group H
(G20 @ 20 mbar) NAT
MODELS
kW Per Burner
GFIR

Setting Pressure For "MIN" Tap Position

2ND Family, Group H
(G20 @ 20 mbar) NAT. GAS
MODELS
mbar
GFIR 10.5

North America

Operating Manifold Pressure
Natural 4.0" wc Propane 10.0" wc
Total Input
BTU/H
28,000
Gas input ratings shown here are for installations up to 2,000 ft. (610m) above seal level. Specify altitudes over 2,000 ft.
Page 6
Gas Pressure
Gas Type
(mbar)
G20
I
2H
G31
I
3P
G31
I
3P
Injector Size
DMS mm
1.6mm 1.6
(G31 @ 37/50 mbar) PROPANE
4.2
(G31 @ 37/50 mbar) PROPANE
" W.C.
4.2

Australian Market

BTU/H
26,000

Gas Inlet Size

Connection
(North America &
Australia)
20
3/4" NPT Top Gas
37
Connection
50
3rd Family, Group P
G31 @ 37/50 mbar inlet
Setting
Injector Size
Pressure*
mbar DMS
37 1.1mm
50 61
3rd Family, Group P
kW Per Burner
4.2
3RD Family, Group 3P
mbar " W.C.
23 9.4
Operating Manifold Pressure
Natural 1 kPa (4.0" wc)
MJ/H Injector Dia.
21.0 2.4 mm
Connection CE Models
(ISO7-1)
3/4" (19.1mm) BSPT
mm
1.1
0.99
# Of
Burners
2
LPG 2.49 kPa (10.0" wc)
Total Input
MJ/H
21.0
Part # 4526026 Rev. 03 (06/12/14)
Injector Dia.
1.4mm