Target Group For This Manual; Intended Use; Fitting The Fastening Frame - Dometic CoolAir SP 950C Instrucciones De Instalación

Ocultar thumbs Ver también para CoolAir SP 950C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
CoolAir SP950C
4

Target group for this manual

The installation information in this manual is only intended for qualified
personnel at workshops, who are familiar with the guidelines and safety
precautions to be applied during the installation of vehicle accessory parts.
5

Intended use

The fastening rail is used for installing the SP950C condenser unit for the
CoolAir SP950 parking cooler to the following vehicles: Renault Magnum.
The fastening frame is attached on the left of the rear cab wall.
When fastening the fastening frame, use existing fastening points on the
vehicle. You do not need to drill new holes.
6

Fitting the fastening frame

A
NOTICE!
Observe the information in the installation manual when fitting the
CoolAir SP950 parking cooler.
I
NOTE
Operating instructions can be found in the operating manual for
the CoolAir SP950 parking cooler.
Basic assembly is described in fig. 1, page 3:
Item
Designation
1
Fastening frame
2
Condenser unit
3
Cover
EN
Target group for this manual
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Coolair sp950c

Tabla de contenido