Refrigerator
Spillproof Plus Shelves with Nano Technology
These spillproof shelves contain liquids with no raised edges in order to provide extra shelf capacity.
Standard Spillproof Shelves
Standard spillproof shelves are constructed of polypropylene molded around the glass and metal
rail. This design means that the shelves are completely enclosed and liquids can't seep under the
glass. This localizes spills and makes clean-up easier.
Note: Foods and beverages placed on the uppermost shelf under the air vent may freeze.
Shelf Adjustment
You can adjust the shelves to match the way you use your refrigerator. To remove the shelves, push
up on the shelf, tilt upward at the front releasing the hooks from the shelf support, then pull the
shelf straight out.
To replace shelves, guide the rear hooks of the shelf into the slots in the shelf supports. Then, tilt
the shelf up at the front until the hooks drop into the slots, and lower the front of shelf to level
position.
To avoid personal injury and property damage, confi rm shelf is secure
before placing items on shelf.
To avoid personal injury or property damage, handle tempered glass
shelves carefully. Shelves may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Door Bin Adjustment
Your refrigerator's door bins hold two-liter bottles and can be placed in any position on the
refrigerator door. To remove a bin, simply grasp it, lift the bin up, and pull it out.
To replace the bin, place it over the glides in the refrigerator door, and push the door bin
down to lock it into place.
Dairy Compartments
Your refrigerator's dairy compartment doors are surrounded by gaskets for a tighter seal. This
allows items to stay fresh much longer. The dairy compartments can be adjusted to meet
your unique storage needs.
To remove the dairy compartments, simply grasp, lift up and pull out. To replace, position the
dairy compartment over the glides in the refrigerator door, and push the compartment down
to lock it into place.
CAUTION
CAUTION
10