Assembly; Operation; Maintenance; Cleaning And Storage - Black and Decker NST2118 Manual De Instrucciones

NOTE: Ensure the sweeper is switched off and the battery is
removed before attaching or removing the sweeper tubes. The
inner tube must be assembled to the housing before use.
• TUBE ASSEMBLY: To attach the inner tube to the sweeper, line
up the tube with the sweeper housing as shown in figure D.
D
Push the tube into the sweeper housing until the lock button
engages the lock hole in the tube. Repeat this process for the
outer tube.

OPERATION

CAUTION:
safety glasses. Wear a filter mask if the
operation is dusty. Use of gloves, long
pants and substantial footwear is
recommended. Keep long hair and loose
clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
• Hold the sweeper with one hand as
shown in figure E and sweep from side to
side with the nozzle several inches above
the ground. Slowly advance keeping the
accumulated pile of debris in front of you.

ASSEMBLY

E
Always wear
WARNING:
SWITCHING ON AND OFF (FIGURE F)
HANDS TO GRIP THE PRODUCT FIRMLY
WHEN SWITCHING ON.
To switch the sweeper on, slide the on/off
switch forward .
To switch the sweeper off, slide the on/off
switch back.
CAUTION:
SELF OR BYSTANDERS.

MAINTENANCE

CAUTION:

CLEANING AND STORAGE

ON THE UNIT.
Use only mild soap and a damp cloth to clean the unit. Never let
any liquid get inside the unit; never immerse any part of the unit
into a liquid.
Your sweeper should be stored in a dry place. Do not store the unit
on or adjacent to fertilizers or chemicals. Such storage can cause
rapid corrosion of the metal parts.
7
F
USE BOTH
DO NOT POINT UNIT DISCHARGE AT
DO NOT POUR OR SPRAY WATER