Evenflo Exersaucer BABY ACTIVE Manual De Instrucciones página 6

Assembling the ExerSaucer
R
S
S
M
R
S
S
T
T
7. Turn the tray over and place three large springs
R the center of each spring dome
P
8. Insert three upper legs
the tray. Twist each upper leg, as shown. Make sure
height adjustment button
After all three upper legs are installed, turn tray over to
the upright position.
S
T
9. Align and start each upper leg
M
. Push button
until upper leg snaps into place.
To adjust height:
ALWAYS remove baby from ExerSaucer before adjust-
ing. Push button
Make sure that all three legs are adjusted to the same
position.
During use, allow the baby's toes only to touch the base.
DO NOT allow the baby to stand flat-footed on the base. As
baby grows and becomes more active, raise the tray to the
next level so that baby enjoys the most comfortable fit and
maximum use of the rock, spin, and bounce features.
4
P
.
S
over the springs and onto
T
is facing outward.
S into the lower leg
T
and guide upper leg into lower leg
T
until the desired position is obtained.
WARNING
R into