Assembling The Exersaucer - Stage 2 - Evenflo Exersaucer BABY ACTIVE Manual De Instrucciones

Assembling the ExerSaucer
Stage 2 is used for infants 4 months old (who can hold up head and neck unassisted)
Stage 2
C
B
C
D
D
D
to walking age and under 30 inches tall.
A
A
F
E
B
H
G
J
A
1. Turn ExerSaucer base
(3) stabilizer feet
foot bracket hole
side snaps into the opposite hole
three (3) stabilizer feet are installed.
C
To use stabilizer feet:
Flip the three (3) stabilizer feet out from beneath base
to prevent ExerSaucer from rocking.
B
2. Place seat ring
holders
holders, as shown.
3. Turn seat ring right side up.
Align triangle
triangle
Snap the plastic tabs
on the seat ring.
I
Continue this process until all tabs are attached to
all pegs, then push the seat pad down inside the seat
ring.
2
A
upside down and locate three
B . Insert one side of foot
C and twist the foot until the other
D upside down and locate the wheel
E
. Snap six (6) seat wheels
G
on the back of the seat ring with the
H on the seat pad label.
I
on the pad over the pegs
Stage 2
B into the
C . Repeat until all
F
into wheel
J