Safety Instructions For The Operator; Gb Installation And Operating Instructions - Wilo AlarmControl Instrucciones De Instalación Y Funcionamiento

CAUTION!
There is a risk of damaging the pump/unit. "Caution" implies that damage to
the product is likely if the information is disregarded.
NOTE:
Useful information on using the product. It draws attention to possible
problems.
2.2 Personnel qualifications
The installation personnel must have the appropriate qualification for this work.
2.3 Danger in event of non-observance of the safety instructions
Non-observance of the safety instructions can result in risk of injury to persons
and damage to pump/unit. Non-observance of the safety instructions can result
in the loss of any claims to damages.
In detail, non-observance can, for example, result in the following risks:
• Failure of important pump/unit functions,
• Failure of required maintenance and repair procedures
• Danger to persons from electrical, mechanical and bacteriological influences,
• Property damage

2.4 Safety instructions for the operator

The existing directives for accident prevention must be adhered to.
Danger from electrical current must be eliminated. Local directives or general
directives [e.g. IEC, VDE etc.] and local power supply companies must be
adhered to.
2.5 Safety instructions for inspection and installation work
The operator must ensure that all inspection and installation work is carried out
by authorised and qualified personnel, who are sufficiently informed from their
own detailed study of the operating instructions.
Work to the pump/unit must only be carried out when at a standstill.
2.6 Unauthorised alteration and spare part production
Alterations to the pump/unit are only permissible after consultation with the
manufacturer. Original spare parts and accessories authorised by the manufac-
turer ensure safety. The use of other parts can nullify the liability from the
results of their usage.
2.7 Unacceptable operating modes
The operating safety of the supplied pump/unit is only guaranteed for conven-
tional use in accordance with Section 4 of the operating instructions. The limit
values must on no account fall under or exceed those specified in the catalogue/
data sheet.
Installation and operating instructions AlarmControl
English
11