Product Specifications; Unpacking; Set-Up; Assembly - Generac 0060240 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS

CONSUMER
Outlet Pressure - (PSI / BAR)
Flow Rate - (GPM / LPM)
Water supply temperature - (°F / C°)
Hose length - (Feet / Meters)
Chemical Tank(s) - Number per unit
Chemical Tank - Capacity (Gal)
Nozzles - Number per unit
Lance Length (Inches / cm)
Gun
Engine Displacement - (Cubic Inch / cc)
Spark Plug Type
Spark Plug Gap - (Inches / mm)
Fuel Capacity - (Quarts / Liters)
Oil Capacity - (Oz / Liters)
Low Oil Shut Down System
On/Off Switch

UNPACKING

1. Remove the parts bag, accessories, and inserts included with
power washer.
2. Open carton completely by cutting each corner from top to
bottom.
3. Ensure you have all included items prior to assembly.
• Main Unit
• Handle Assembly
• High Pressure Hose
• Siphon Hose & Filter
• Spray Gun
• Lance with Quick Connect Fitting
• Oil Bottle
• Hose Hook Wireform
• Parts Bag (which includes the following):
~ Chemical Tank Cap with hole if model is equipped with a
Chemical Tank
~ Operator's Manual
~ Owner's Registration Card
~ Bag containing Color-coded Nozzles
4. If you are missing any items from your carton, please call
Generac Customer Service at 1-888-436-3722. When calling
for assistance, please have the model and serial number from
the data tag available.
5. Fill out and send in registration card. Write Model number,
Serial number & date of purchase in the table located in the
"Where to Find Us" section.
2500/172
2.3/7.6
25/7.6
0
N/A
3
Standard
11.9/196
F7RTC or equivalent
0.028-0.031/0.70-0.80
3.8/3.6

ASSEMBLY

Read entire operator's manual before you attempt to assemble or If
you have any problems with the assembly of your power washer,
please call Generac Customer Service at 1-888-436-3722. When
calling for assistance, please have the model and serial number
from the data tag available.
1. Place handle (A) onto handle supports (B). Push in latch
buttons and allow handle to slide into position (C). Button will
lock handle into place (Figure 2).
2700/186
100/38 Max
25/7.6
1
0.75
4
20/51
20/0.6
Yes
Yes
Figure 2 – Attach Handle

Set-up

3000/207
2.7/10.2
30/9.1
2
0.75
5
Deluxe
12.9/212
3.2/3.0
5

Publicidad

Tabla de contenido
loading

Tabla de contenido