Craftmade TIM54ABZ Guia De Instalacion página 9

9. Light Kit Assembly (Optional).
Remove socket rings from sockets. Attach
metal shades with socket rings provided.
Install three 60 watt max. candelabra base
bulbs (included).
Important: When replacing bulbs, please
allow bulb(s) and metal shade(s) to cool down
before touching them.
socket ring
[Please continue to Section 10 on the following
page if using light kit.]
metal shade
bulb
motor housing
If you wish to use your fan WITHOUT the light
kit, remove hex nut and lock washer from the
threaded rod at the top of the light kit fitter.
Unscrew light kit adaptor from top of light kit
fitter and then gently feed the BLACK and
WHITE wires from the light kit fitter (one by
hex nut
one) through the hole in the middle of the
fitter plate
lock washer
light kit adaptor.
Locate small cap in one of the hardware packs
and place firmly in hole in middle of light kit
light kit adaptor
adaptor.
Align holes in light kit adaptor with holes in
fitter plate. Re-insert 3 screws that were
cap
previously removed (page 7) and securely
molex
tighten all screws with Phillips screwdriver.
connections threaded rod
light kit fitter
page 8