Bimar S603.EU Folleto De Instrucciones página 22

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• The surface must be stable, not sloping (as the unit may fall over), heat resistant.
• Ensure that the power cable is correctly positioned and does not come into
contact with hot parts or sharp edges, nor become wound around the appliance
itself, is not twisted and does not snag, in order to prevent the appliance from
falling. Make sure there's no risk of tripping, to prevent people from accidentally
tripping over it or being injured.
• Make sure that the air inlet and outlet are not blocked, to prevent fire hazards or
possible overheating; do not cover the device, nor use it for drying laundry.
• If there is a fault or the appliance is not working correctly, switch it off and have it
checked by a qualified professional. Repairs done by an unqualified person can
be dangerous and cause the guarantee to become void.
DESCRIPTION
The smart heater with built-in Wi-Fi feature can be used through your Android or iOS
smartphone, with the dedicated app.
Its
electronic
board is provided with
communication between heater and smartphone via app.
The app can be used to remotely control the following functions: (stand-by; 4
modes: Eco/Comfort/Rapid/Defrost; temperature adjustment 5~37°C, timer and
fan).
Notice: this app can is only supported by Android or iOS smartphones.
1.1 FIRST INSTALLATION/CONFIGURATION
1.
Download the following app on your smartphone: "HOTECH BIMAR". For
Android use Google play and for iOS use App Store.
2.
Attention: first make sure in the installation environment there is a Wi-Fi network
with an appropriate signal, then make sure the smartphone is connected to the
same network as the heater.
3.
Insert the plug in the power socket, press to put the side switch to position I.
Touch "
", touch once again and keep pressed "
symbol "
" blinks fast.
Put the side switch to position 0.
Disconnect the plug from the power socket and leave the heater unplugged for
30 seconds.
Insert the plug in the power socket and turn the side switch to position I.
Do the following on the smartphone:
Upper left symbol
exit the app.
if pressed shows information about Bimar and allows to
22/84
Wi-Fi functionality
" until the connection
that allows

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hc200l

Tabla de contenido