Adjusting Cutting Height - AL-KO Solo 582 Manual Del Usuario

Procedure for assembling the grass catching
device (6)
Place the grass catcher frame over the plastic
tray of the grass catcher bag and pull the
attachment flaps of the grass catcher bag in the
order  -  -  -  -  over the frame.
c
Place the grass catcher cover (c) onto the frame
and hook both plastic angles (d) of the crass
catcher cover tightly around the frame.
c
e
(M5x20 mm)
Insert the fastening screw (e) completely
through the bore in the crossbrace (f) of the
frame.
Turn the screw (e) into the bore (g) of the
cover (c) to attach the cover to the frame.
d
f
g
Procedure for fitting the grass catching
device (6) to the lawn mower
7
b
Hang both hooks (b) of the grass catcher frame
down onto the rod (a) of the mower housing.
After fitting the grass catching device the sheet
metal part (c) of the grass catcher frame has to
be flush with the plastic edge of the mower
housing.
Lower the ejection shield (7) onto the grass
catching device.

5.4 Adjusting cutting height

The mower is equipped with a continuously
adjustable cutting height of approx. 25–70 mm
Open the ejection
shield (7) of the lawn
mower.
Lift the assembled
grass catching
device by the handle
and place it under
the ejection shield of
the lawn mower.
a
c