Identifying Switch Settings On The Wireless Receivers; Connecting The Speakers - Bose VIRTUALLY INVISIBLE 300 Guia Del Usuario

S E T T I N G U P T H E S P E A K E R S
Identifying switch settings on the
wireless receivers
Your speakers connect to wireless receivers to communicate with the SoundTouch® 300
soundbar. The receivers come preset to a left and right channel out of the box. You can
use the switch on the front of the receiver to adjust the channel settings.
1. Confirm that the switch on one wireless receiver is set to R (right).
2. Confirm that the switch on the other wireless receiver is set to L (left).
Note: Make sure that one wireless receiver is always set to L (left) and the other is set
to R (right).

Connecting the speakers

1. Insert the adapter into the back of your speaker.
2. Insert the other end of the two-pin cable into your wireless receiver.
You hear or feel a click.
3. Repeat steps 1 – 2 to connect your other speaker.
E N G L I S H - 9