Identification; Features - Greenlee C3 Auto Whip Manual De Instrucciones

Identification

11
10
1. HMI touch screen
2. Emergency stop push switch
3. Lockout/tagout switch
4. Yellow release switch
5. Green "start" switch
6. Green pilot light
7. USB port
8. Polycarbonate viewing shield/access door

Features

• Automated notching and cutting stations with
automatic cable feed.
• HMI touch screen for programming
whip configurations.
• *Cuts steel and aluminum clad type AC. BX, MC,
FMC cable with outside diameter of 1/2" to 1".
• USB port to upload custom whip configuration.
• Memory to store up to 48 "cable types" of cable
diameter and notching depth.
Not intended for PVC coated clad cable, liquid-light conduit, or
flexible PVC conduit.
• Memory to store up to 96 "whip configurations" of a
specified cable type, whip length, lead strip length,
Greenlee Tools, Inc.
7
3
6
2
5
4
1
8
12
9
10
C3 Auto Whip Clad Cable Cutter
14
9. Removable chip tray
10. Cable feed tensioner lever
11. Input horn
12. Handle and safety interlock
13. Output tube
14. Lift points (Chip tray removed)
15. Circuit breaker access panel
and tail strip length.
• Memory to sore and run a production job with up to 96
whip ends of different lengths from one reel of cable.
• Cuts up to 9,999 whips of a given diameter
and length.
• Keeps track of cable length remaining on the reel.
• Produces whip lengths from 1' (.3 m) to 83'
(25 m) long.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
15
13