Thrust Bearing Replacement - Greenlee C3 Auto Whip Manual De Instrucciones

C3 Auto Whip Clad Cable Cutter
Service (con't)

Thrust Bearing Replacement

1. Lift handle to top position
2. Insert a cable into the machine
3. Lower the handle
4. Loosen and remove the bolt and nut
5. Remove the worn out thrust bearing and replace with the new thrust bearing
6. Reattach the handle
37
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070