Notching Saw Blade Replacement - Greenlee C3 Auto Whip Manual De Instrucciones

Service (con't)

Notching Saw Blade Replacement

1. Open the Acrylic Door
2. Place an open end wrench on the flats of the shaft behind the saw blade.
3. Loosen and remove the 1/4-20 x .75" LH cap screw securing the blade.
NOTE – THIS SCREW HAS LEFT HANDED THREADS.
4. Remove the washer.
5. Remove the Cut Off Saw Blade.
6. Position the new Notching Saw Blade with the teeth oriented as shown below
and install by repeating steps 5 thru 1 above.
Enlarged View
Blade Rotation
Greenlee Tools, Inc.
C3 Auto Whip Clad Cable Cutter
E
36
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Blade Rotation
G
F