Danfoss VLT AQUA Drive Manual De Funcionamiento página 19

®
VLT AQUA Drive
Manual de Funcionamiento
4.2.3. Mounting A5, B1, B2, C1 and C2.
Ilustración 4.10: Drilling holes.
Step 1: Drill according to the dimensions in the
following table.
Ilustración 4.11: Correct mounting of screws
Step 2A: This way it is easy to hang the unit
on the screws.
Ilustración 4.12: Wrong mounting of screws
Step 2B: Do not tighten screws completely.
®
MG.20.M2.05 - VLT es una marca registrada de Danfoss
4. Instalación mecánica
Ilustración 4.13: Mounting of unit.
Step 3: Lift the unit onto the screws.
Ilustración 4.14: Tightening of screws
Step 4: Tighten screws completely.
4
19