Cleaning - Silvercrest SSMS 600 C3 Instrucciones De Uso

Cleaning

WARNING - RISK OF ELECTRIC SHOCK!
► Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
►
it in water or holding it under running water.
WARNING - RISK OF PHYSICAL INJURY!
► To avoid injuries, exercise caution when handling the extremely sharp
blade 7. Reassemble the liquidiser after use and cleaning to prevent injury
from the exposed blade. Keep the blade out of the reach of children.
WARNING - PROPERTY DAMAGE!
► DO NOT clean the accessories of your hand blender in the dishwasher as
it may cause damage to them.
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 9 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the blender 5, the bowl lid 6, the bowl 8, the whisk 0, the
measuring beaker q and the blade 7 thoroughly in washing-up water and
then remove the detergent residues by rinsing them with clean water.
4) Dry everything well with a dish towel and ensure that the appliance is com-
pletely dry before re-use.
■ 70 │ GB │ MT
Under no circumstances may the motor unit 4 be cleaned by immersing
SSMS 600 C3