Ingeteam
Potential hazards for people
Bear in mind the following warnings concerning personal safety.
The equipment may remain charged after disconnecting the renewable power supply.
Carefully follow the mandatory steps in the manual for removing the voltage.
Always follow the indications in the manual on moving and placing the unit.
Potential hazards for the equipment
Bear in mind the following warnings concerning protection of the equipment.
After all duly authorized handling, check that the combiner box is ready to start operation. Only after
this can you connect it, following the instructions in the manual.
Do not disconnect or connect any terminal while the inverter is operating. Disconnect and check for
absence of voltage first.
Personal Protective Equipment (PPE)
When working on the unit, use the following safety equipment recommended by Ingeteam as a minimum.
Name
Safety footwear
Helmet with face shield
Working clothes
Dielectric gloves
Hearing protection device
Anti-impact glasses
Tools and / or equipment used in live work must have at least Category III-1000 Volts insulation.
Should the country's regulations demand another kind of personal protection, you should appropriately supplement
the equipment recommended by Ingeteam.
vi
In compliance with standard ASTM F2413-05
In compliance with standard ANSI/ISEA Z89.1-2009, provided there are
elements with directly accessible voltage.
Close-fitting, non-flammable, 100% cotton
In compliance with standard ANSI/ISEA 105-2011
In compliance with standard ANSI S12.6-1997
Use of anti-impact glasses when accessing the fan area.
Important Safety Instructions
Description
ABI2015IQM03_ - Installation manual