Removing Clogs - Panasonic MC-V7314 Instrucciones De Operación

Hose
Tuyau
Manguera

Removing Clogs

The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Suction
Inlet Cover
Couvercle
de l'entrée
d'aspiration
Cubierta de
aspiración
Short Hose
Tuyau court
Manguera
corta
- 40 -
Unplug vacuum.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check the wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Turn vacuum over and inspect
agitator area for clogs.